In this step, you will add a virtual machine that will run DOS 6.22. First, open VirtualBox At the top of the screen, you will see a button labeled 'New'. Give the virtual machine a name. Give the virtual machine some RAM. I chose 64 megs because that is the most that DOS 6.22 will see. Ms Dos 622 Iso Download Virtualbox By dafavika1987 Follow Public I would like to install MS DOS 6.22 under Windows 7 in dual boot mode, so that I can operate my machine and transfer all my Windows and other files to an external hard disk for back-up purposes. Xbox 360 controller emulator mac os x. How to install Ms-DOS 6.22 part one So, you don't know anything about Ms-DOS and/or you just got an old pc and, unfortunately, there is a problem. The hard drive has nothing on it. The solution is simple, you need to reinstall dos. It could look hard to do at the first glance, but in fact, there is no need to be a computer wizard. MS-DOS Boot Disk Download. These are the MS-DOS boot disk images available from AllBootDisks. Download the diskette image you need, and if you need assistance creating a bootable diskette from this image, visit the how-to page. Thanks to Ed Jablonowski from Bootdisk.com for creating these disks.
After many failed attempts of trying to install MS-DOS 7.0 and not feeling it with FreeDOS, I have decided to try to install MS-DOS 6.22. Unfortunately, there was no guide on the internet to help me and I did not feel the will to get USB Floppy Drives and Floppies. I tried to emulate using a USB Pen Drive but all my attempts have failed. So instead, I have tried a new method using bits and pieces from the web.AllBootDisks ISO Image Downloads These are the ISO boot disk images available from AllBootDisks. Download insaniquarium 2 mod apk. Download the ISO image you need, and if you need assistance creating a bootable CD from this image, visit the how-to page.
What you need:- A PC with CD or DVD drive with an ATA HDD operation option in BIOS (and also a secondary PC if using a single DVD/CD-RW)
- 3 CD-R/DVD-R discs or a single CD-RW/DVD-RW disc
- MS-DOS 6.22 install disk .imgs
- Patience
First, you need to use mkisofs to make a bootable CD floppy image. Download it along with other tools from the cdrecord project. Next, make sure you have .img files of MS-DOS 6.22 install floppies. Make a new directory to put your .img files in and don't forget the name. Copy only the first disk to that directory. Now, in the directory that the folder is located in, use mkisofs with these parameters :
-b 'filename of floppy image name' -o 'name of output iso image' 'name of directory with .img image' . An iso file for the image should appear in the current directory.Now, replace the disk 1 image with the next disk and repeat the previous step. Repeat until all imgs were used. Now, you need to burn each iso to a CD or DVD. Turn on your test PC and change your bios settings to be in ATA compatibility mode and not ACHI mode. Now, boot off of Disk 1 and continue setup as normal. When it prompts you, insert the next disk and wait till the drive is activated then press enter and repeat until setup is finshed. Boot your PC and see what happens. If your pc boots normally then you are done. If you see a blinking cursor then insert Disk 1 and press F3 twice to enter a DOS prompt. Type in
Ms Dos 622 Iso Free
fdisk /mbr. You should also check to see if the drive partition is active in fdisk. You should now successfully boot to DOS from the Hard disk.You have now installed MS-DOS 6.22 to your PC without using floppy disks. This is my first guide so I am accepting criticism.
Moderator edit by Battler: Removed the poll as it was pointless and therefore against the rules.
Ms-dos 6.22.iso Image File
Comments
Ms Dos 6.22 Iso Cd
- Basically, you can do that by creating a bootable 1.44mb floppy disk image, and then using a CD-burning program that supports it to create a bootable CD with that image (boot options are usually specified in a special settings or options menu). Note that to see the rest of the CD you must include DOS CD-ROM drivers. I've use Imageburn 2.4.4.0 to make such CDs. But someone might be able to recommend a better tool.
Or better yet, just attach a USB 1.44mb floppy drive. Everyone should have a floppy drive, or better yet a dozen! :P
Also, if you just want real-mode DOS, but don't care about the version, you can also try the unofficial CDU DOS '7.1' CD. https://winworldpc.com/product/ms-dos/7x (Basically the DOS included with Windows 98). - Well, i do have a usb floppy tool, but only one disk which is right now, and i think you need 3 disks. I'll try to use the CD tips you gave me, and I will get back to this soon to see how it goes!
I could try putting it on a raspberry pi, but I'll save that for a later time - Basically, you can do that by creating a bootable 1.44mb floppy disk image, and then using a CD-burning program that supports it to create a bootable CD with that image (boot options are usually specified in a special settings or options menu). Note that to see the rest of the CD you must include DOS CD-ROM drivers. I've use Imageburn 2.4.4.0 to make such CDs. But someone might be able to recommend a better tool.
Or better yet, just attach a USB 1.44mb floppy drive. Everyone should have a floppy drive, or better yet a dozen! :P
Also, if you just want real-mode DOS, but don't care about the version, you can also try the unofficial CDU DOS '7.1' CD. https://winworldpc.com/product/ms-dos/7x (Basically the DOS included with Windows 98).
Agreed, 7.1 CD would be much better for this purpose. It includes 'native' CD and Mouse drivers, unlike 6.22.
Although it is your choice, MS-DOS would probably not be a very good use of that computer. My suggestion would be to install Windows 2000 or even (shudder) Millenium Edition to truly experience the computers of old. With specs like it has, Windows 7 would honestly be pretty good as well on such a machine (if you have enough disk space and could afford another 4GB of RAM). From there, you could probably just install VirtualBox or PCem and you'd be much better off to get the most out of your computer, as installing MS-DOS by itself would not have the drivers for your sound card or video card. - I don't recommend to install real MS-DOS on core 2 duo or higher.
The perfomance of 8088 emulation on modern CPU is slow than 80386 / 80486 / Pentium 1 based machine.
But if you really want to install DOS on real PC, I recommend unofficial CDU DOS '7.1' CD that SomeGuy said. - I recommend trying FreeDOS, as its still being supported and gets regular updates.. you can get it from http://www.freedos.org
- Basically, you can do that by creating a bootable 1.44mb floppy disk image, and then using a CD-burning program that supports it to create a bootable CD with that image (boot options are usually specified in a special settings or options menu). Note that to see the rest of the CD you must include DOS CD-ROM drivers. I've use Imageburn 2.4.4.0 to make such CDs. But someone might be able to recommend a better tool.
Or better yet, just attach a USB 1.44mb floppy drive. Everyone should have a floppy drive, or better yet a dozen! :P
Also, if you just want real-mode DOS, but don't care about the version, you can also try the unofficial CDU DOS '7.1' CD. https://winworldpc.com/product/ms-dos/7x (Basically the DOS included with Windows 98).
Agreed, 7.1 CD would be much better for this purpose. It includes 'native' CD and Mouse drivers, unlike 6.22.
Although it is your choice, MS-DOS would probably not be a very good use of that computer. My suggestion would be to install Windows 2000 or even (shudder) Millenium Edition to truly experience the computers of old. With specs like it has, Windows 7 would honestly be pretty good as well on such a machine (if you have enough disk space and could afford another 4GB of RAM). From there, you could probably just install VirtualBox or PCem and you'd be much better off to get the most out of your computer, as installing MS-DOS by itself would not have the drivers for your sound card or video card.
I actually tried 2000, but i cant get it to boot off of a cd or a usb. I was going to try mistake edition, but it would not be worth it. It could be my cd drive, but that could not be it. I have used 7 on it by using a HDD from a old laptop, and using my 7 disc. Here's a off topic question, is there a certain way to make boot cd's? I am never able to boot off of them, and I have to find other options. Thanks! - Basically, you can do that by creating a bootable 1.44mb floppy disk image, and then using a CD-burning program that supports it to create a bootable CD with that image (boot options are usually specified in a special settings or options menu). Note that to see the rest of the CD you must include DOS CD-ROM drivers. I've use Imageburn 2.4.4.0 to make such CDs. But someone might be able to recommend a better tool.
Or better yet, just attach a USB 1.44mb floppy drive. Everyone should have a floppy drive, or better yet a dozen! :P
Also, if you just want real-mode DOS, but don't care about the version, you can also try the unofficial CDU DOS '7.1' CD. https://winworldpc.com/product/ms-dos/7x (Basically the DOS included with Windows 98).
Agreed, 7.1 CD would be much better for this purpose. It includes 'native' CD and Mouse drivers, unlike 6.22.
Although it is your choice, MS-DOS would probably not be a very good use of that computer. My suggestion would be to install Windows 2000 or even (shudder) Millenium Edition to truly experience the computers of old. With specs like it has, Windows 7 would honestly be pretty good as well on such a machine (if you have enough disk space and could afford another 4GB of RAM). From there, you could probably just install VirtualBox or PCem and you'd be much better off to get the most out of your computer, as installing MS-DOS by itself would not have the drivers for your sound card or video card.
I actually tried 2000, but i cant get it to boot off of a cd or a usb. I was going to try mistake edition, but it would not be worth it. It could be my cd drive, but that could not be it. I have used 7 on it by using a HDD from a old laptop, and using my 7 disc. Here's a off topic question, is there a certain way to make boot cd's? I am never able to boot off of them, and I have to find other options. Thanks!
It's probably not going to boot from USB anyways. Try checking your BIOS settings under the 'Boot' section. Make sure the optical drive is both enabled and before the hard disk in the listing.
Some computers also have a BBS Popup option or a Boot menu you can get into upon start up by pressing a key (usually F12). You could always try this too. - It's probably not going to boot from USB anyways. Try checking your BIOS settings under the 'Boot' section. Make sure the optical drive is both enabled and before the hard disk in the listing.
Some computers also have a BBS Popup option or a Boot menu you can get into upon start up by pressing a key (usually F12). You could always try this too.
I have tried F12, but not the boot order. I will try to burn a Windows 2000 Advanced server, and try it since the computer might get new plans soon. Thanks for the information, and I will still check back if anyone has any suggestions.
Thanks again! - It's probably not going to boot from USB anyways. Try checking your BIOS settings under the 'Boot' section. Make sure the optical drive is both enabled and before the hard disk in the listing.
Some computers also have a BBS Popup option or a Boot menu you can get into upon start up by pressing a key (usually F12). You could always try this too.
I have tried F12, but not the boot order. I will try to burn a Windows 2000 Advanced server, and try it since the computer might get new plans soon. Thanks for the information, and I will still check back if anyone has any suggestions.
Thanks again!
Windows 2000 Advanced Server might not be a good choice either. Professional or Server would probably be best.
I suppose if you are going to go for the absolute top end, you could try Database Server as well. - It's probably not going to boot from USB anyways. Try checking your BIOS settings under the 'Boot' section. Make sure the optical drive is both enabled and before the hard disk in the listing.
Some computers also have a BBS Popup option or a Boot menu you can get into upon start up by pressing a key (usually F12). You could always try this too.
I have tried F12, but not the boot order. I will try to burn a Windows 2000 Advanced server, and try it since the computer might get new plans soon. Thanks for the information, and I will still check back if anyone has any suggestions.
Thanks again!
Windows 2000 Advanced Server might not be a good choice either. Professional or Server would probably be best.
I suppose if you are going to go for the absolute top end, you could try Database Server as well.
Ok, so I did try booting it off of the cd again, i changed the boot order, went to the hdd . (I did check to see if it saved) I tried to boot from it directly, i got an error: 'Could not boot from selected boot device' and some options using the F1, F2, and F5 keys. I tried to retry, but just got the same error. I know it probably isn't the cd-rom drive, since it can boot from a windows 7 disk. Gonna do some more searching, and I could be messing up somewhere along the line. Thanks for all of the help to everyone contributing to this topic! :P - It's probably not going to boot from USB anyways. Try checking your BIOS settings under the 'Boot' section. Make sure the optical drive is both enabled and before the hard disk in the listing.
Some computers also have a BBS Popup option or a Boot menu you can get into upon start up by pressing a key (usually F12). You could always try this too.
I have tried F12, but not the boot order. I will try to burn a Windows 2000 Advanced server, and try it since the computer might get new plans soon. Thanks for the information, and I will still check back if anyone has any suggestions.
Thanks again!
Windows 2000 Advanced Server might not be a good choice either. Professional or Server would probably be best.
I suppose if you are going to go for the absolute top end, you could try Database Server as well.
Ok, so I did try booting it off of the cd again, i changed the boot order, went to the hdd . (I did check to see if it saved) I tried to boot from it directly, i got an error: 'Could not boot from selected boot device' and some options using the F1, F2, and F5 keys. I tried to retry, but just got the same error. I know it probably isn't the cd-rom drive, since it can boot from a windows 7 disk. Gonna do some more searching, and I could be messing up somewhere along the line. Thanks for all of the help to everyone contributing to this topic! :P
At this point it might be your disc. If you can, try re-burning it. - Just FYI folks, there is no need to quote an entire post if it is the previous post. And even if it is not, one should prune a quote down to what is relevant to your reply.
Having to read past a dozen irrelevant nested quotes of the entire thread gets tiresome, and is quite silly. - To install MS-DOS 6.22 on a cdrom, symply copy all of the files (including the hidden files) to directory on a cdrom. If you have the supplemental disk, you can put that into the same directory too. You can install Windows 3.1x in the same way.
You need to make a boot diskette, and use that as the boot block for the cdrom. You don't need an actual floppy, an image that works in VPC is fine. You make up a cdrom with DOS, Windows, and any DOS-era proggies you want to play with, and boot from the cdrom.
You can set the cdrom letter to something high (like s: as in OS/2), and use xmsram for the ram drive on r: You then simply change to the MSDOS622 directory and run setup, and to the WIN311 directory and run its setup.
You need to do something about the config.sys and autoexec.bat files, and copying the dos drivers to the hard drive too. The DOS setup won't do that. It's best to do this from the hard drive.
With Windows 2000, you need to set the 48BLBA in the SETUPREG hive in the install. This involves either creating the boot disks and editing the hive on that disk, or modifying the setup and creating the patch there. There is a discussion at http://www.msfn.org/board/topic/75713-4 .. up/?page=1 the necessary batch file, and how to rename the default folders, is at the bottom of the page. - Just FYI folks, there is no need to quote an entire post if it is the previous post. And even if it is not, one should prune a quote down to what is relevant to your reply.
Having to read past a dozen irrelevant nested quotes of the entire thread gets tiresome, and is quite silly.
My apologies, I'm still trying to get back into the routine since I've been gone for a while (I think my account was suspended or something and then I lost my password anyways).To install MS-DOS 6.22 on a cdrom, symply copy all of the files (including the hidden files) to directory on a cdrom. If you have the supplemental disk, you can put that into the same directory too. You can install Windows 3.1x in the same way.
You need to make a boot diskette, and use that as the boot block for the cdrom. You don't need an actual floppy, an image that works in VPC is fine. You make up a cdrom with DOS, Windows, and any DOS-era proggies you want to play with, and boot from the cdrom.
You also have to edit the startup information, if you just turn the boot block on without defining a startup application, it will just blink the cursor or give you an error. - I realized that i can't really load anything on a usb, and nothing at all boots.
I have re-burned it multiple times, in turn wasting many CD's. I might as well just buy Windows 2000 on amazon or something.At this point it might be your disc. If you can, try re-burning it.
Could the problem be the power supply? Its running on a 430W power supply, and i am unsure about if you need a certain amount to boot off of it. I guess i'll work toward putting new parts.
Yeah, sorry about clogging the reply's with quotes. I'll try not to always clog it!Just FYI folks, there is no need to quote an entire post if it is the previous post. And even if it is not, one should prune a quote down to what is relevant to your reply.
Having to read past a dozen irrelevant nested quotes of the entire thread gets tiresome, and is quite silly. - A couple of thoughts back on the topic:
First, when experimenting with burning CDs, use a rewritable CD-RW. That saves a lot of headache.
With Windows 2000, you should not need to do anything special. Just burn the 2000 ISO to a CD. All 2000 CDs should be bootable unless the images were incorrectly dumped.
However, I think 2000 requires an IDE CD drive or an SATA drive in IDE emulation mode. For any other kind of drive (USB) it will probably fail with an 'inaccessible boot device' error.
As for creating boot CDs from a 1.44mb image, I noticed some later versions of ImgBurn are buggy and fail. If you are using ImgBurn, try 2.4.4.0 as that is known to work.
If your BIOS does not support booting from CD or USB devices, try the Ploop Boot Manger floppy disk. That is a very handy tool.
Unless the system is having trouble keeping itself powered on, it's not your power supply.Could the problem be the power supply? Its running on a 430W power supply, and i am unsure about if you need a certain amount to boot off of it. I guess i'll work toward putting new parts.
I've got a system running Windows 2000 with an 85W power supply, you should be perfectly fine.
This is true, unless you have a SATA driver loaded.However, I think 2000 requires an IDE CD drive or an SATA drive in IDE emulation mode. For any other kind of drive (USB) it will probably fail with an 'inaccessible boot device' error.
Where can I get this, and does it work with Dell notebooks? I ask because I have an old Dell Latitude computer that needs a reinstall of Windows 2000, but it only boots from diskette, despite having an optical drive in place.If your BIOS does not support booting from CD or USB devices, try the Ploop Boot Manger floppy disk.
Somehow I doubt that a Core 2 Duo would have a diskette drive, but then again mine does, so I guess we'll wait and see.- You know, i dont think I checked what drivers it has loaded. I guess I will check. On the plus side, i was bored, so I decided to try Arch Linux on it, ands its pretty good, considering how much customization it is! I will check what drivers it has installed, since it could have IDE drivers.
- Well, I could buy a IDE drive and use a IDE to SATA converter, and that could work. We will have to see.
- Welp, I took the lazy route and just bought 2000 Professional. I will look into the burning problem, but for now, I'm going to try installing it. Thanks to everyone who contributed!
P.S. I will see the thread explaining how to upload operating systems.